MSS60 Error: 275A, P0358, P131C, P133A, P2321, P2322
From Wiki-DIY
275A - P0358
| Information saved in | DME |
| Fault code | 275A - P0358 |
| Fault text | Ignition cylinder 8, activation |
| Fault description | Ignition Coil 'H' Primary Control Circuit/Open |
| Condition for fault identification | Test condition: Current on PIN A_S_ICC too low with active ignition pulse |
| Terminal condition: TERM87 | |
| Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | |
| Condition for fault memory entry | 8 operating cycles |
| Action in service | 1. Check plug and wiring harness at M ignition coil |
| 2. Replace M ignition coil as indicated | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
275A - P131C
| Information saved in | DME |
| Fault code | 275A - P131C |
| Fault text | Ignition cylinder 8, activation |
| Fault description | Ionic Current Control Module Control Line Ignition Cylinder 8 Low |
| Condition for fault identification | Test condition: Voltage at PIN A_S_ICC too low, ignition channel inactive |
| Terminal condition: TERM87 | |
| Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | |
| Condition for fault memory entry | 8 operating cycles |
| Action in service | 1. Check plug and wiring harness at M ignition coil |
| 2. Replace M ignition coil as indicated | |
| 3. If shorts to ground are entered for all cylinders check fuse for TERM87 power supply | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
275A - P133A
| Information saved in | DME |
| Fault code | 275A - P133A |
| Fault text | Ignition cylinder 8, activation |
| Fault description | Ionic Current Control Module Control Line Ignition Cylinder 8 High |
| Condition for fault identification | Test condition: Current on PIN A_S_ICC too high with active ignition pulse |
| Terminal condition: TERM87 | |
| Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | |
| Condition for fault memory entry | 8 operating cycles |
| Action in service | 1. Check plug and wiring harness at M ignition coil |
| 2. Replace M ignition coil as indicated | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
275A - P2321
| Information saved in | DME |
| Fault code | 275A - P2321 |
| Fault text | Ignition cylinder 8, activation |
| Fault description | Ignition Coil 'H' Primary Control Circuit Low |
| Condition for fault identification | Test condition: Voltage at PIN A_S_ICC too low, ignition channel inactive |
| Terminal condition: TERM87 | |
| Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | |
| Condition for fault memory entry | 8 operating cycles |
| Action in service | 1. Check plug and wiring harness at M ignition coil |
| 2. Replace M ignition coil as indicated | |
| 3. If shorts to ground are entered for all cylinders check fuse for TERM87 power supply | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
275A - P2322
| Information saved in | DME |
| Fault code | 275A - P2322 |
| Fault text | Ignition cylinder 8, activation |
| Fault description | Ignition Coil 'H' Primary Control Circuit High |
| Condition for fault identification | Test condition: Current on PIN A_S_ICC too high with active ignition pulse |
| Terminal condition: TERM87 | |
| Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min) | |
| Condition for fault memory entry | 8 operating cycles |
| Action in service | 1. Check plug and wiring harness at M ignition coil |
| 2. Replace M ignition coil as indicated | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
