MSS60 Error: 27AA, P0068, P0106, P2191

27AA - P0106 Information saved in DME Fault code 27AA - P0106 Fault text Charge plausibility, diagnosis hot - bank 1 Fault description Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance Condition for fault identification Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_PSAU_DELTA_ML_MAX * expansion factors (K_FPLAU_OBD_TE_F, KL_FPLAU_PSAU_PUMG_F) Terminal condition: Engine running Voltage condition: None Condition for fault memory entry 10000 ms Action in service 1. Check induction system B1 for leaks 2. Replace intake manifold pressure sensor Fault effect and breakdown warning MIL on after engine runs 2x Driver information Warning light: MIL Service instruction None 27AA - P0068 class = "diyTable ecuFault" Information saved in DME Fault code 27AA - P0068 Fault text Charge plausibility, diagnosis hot - bank 1 Fault description MAP/MAF - Throttle Position Correlation Condition for fault identification Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_AQ_DELTA_ML_MAX * expansion factor (K_FPLAU_OBD_TE_F) Terminal condition: Engine running Voltage condition: None Condition for fault memory entry 10000 ms Action in service 1. Check induction system B1 for leaks Fault effect and breakdown warning MIL on after engine runs 2x Driver information Warning light: MIL Service instruction None 27AA - P2191 Information saved in DME Fault code 27AA - P2191 Fault text Charge plausibility, diagnosis hot - bank 1 Fault description System Too Lean at Higher Load (Bank 1) Condition for fault identification Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_AQ_DELTA_ML_MAX * expansion factor (K_FPLAU_OBD_TE_F) Terminal condition: Engine running Voltage condition: None Condition for fault memory entry 10000 ms Action in service 1. Check induction system B1 for leaks Fault effect and breakdown warning MIL on after engine runs 2x Driver information Warning light: MIL Service instruction None