MSS60 Error: 2722, P0092: Difference between revisions
Jump to navigation
Jump to search
Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2722 - P0092 |- |'''Fault text''' |Fuel-pressure sensor, signal |- |'''Fault description''' |Fuel Pressure Reg..." |
No edit summary |
||
| Line 1: | Line 1: | ||
__FORCETOC__ | |||
| | ===='''2722 - P0092'''==== | ||
{| class = "diyTable ecuFault" | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Latest revision as of 01:33, 8 February 2015
2722 - P0092
| Information saved in | DME |
| Fault code | 2722 - P0092 |
| Fault text | Fuel-pressure sensor, signal |
| Fault description | Fuel Pressure Regulator 1 Control Circuit High |
| Condition for fault identification | Test condition: Sensor value > 9.5 bar (K_PKS_DIAG_MAX) |
| Terminal condition: TERM87 | |
| Voltage condition: None | |
| Condition for fault memory entry | 5 ms |
| Action in service | 1. Clear fault memory, PKS system test |
| 2. Check plug and wiring harness to PKS | |
| 3. If OK, replace sensor | |
| Fault effect and breakdown warning | MIL lamp comes on after engine runs 2x |
| CC message / display for governed rpm / reduced power | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |