Rcollins at 21:14, 3 February 2015

2015-02-03T21:14:32Z

← Older revision		Revision as of 21:14, 3 February 2015
Line 1:		Line 1:
	{\|		__FORCETOC__
	\|
	\|
			==== '''2B3C - P0308''' ====
			{\| class = "diyTable ecuFault"
	\|-		\|-
	\|'''Information saved in'''		\|'''Information saved in'''

Rcollins: Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2B3C - P0308 |- |'''Fault text''' |Misfire with cutoff, cyl. 8 |- |'''Fault description''' |Cylinder 8 Misfire..."

2015-02-03T21:14:17Z

Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2B3C - P0308 |- |'''Fault text''' |Misfire with cutoff, cyl. 8 |- |'''Fault description''' |Cylinder 8 Misfire..."

New page

{|
|
|
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B3C - P0308
|-
|'''Fault text'''
|Misfire with cutoff, cyl. 8
|-
|'''Fault description'''
|Cylinder 8 Misfire Detected
|-
|'''Condition for fault identification'''
|Test condition: 3.3V in miss window for at least 5 ms (K_AUSS_NS_TIME_MAX) or for entire miss window
|-
|
|Terminal condition: Terminal 15
|-
|
|Voltage condition: none
|-
|'''Condition for fault memory entry'''
|Varies according to load and rpm
|-
|'''Action in service'''
|1. Check spark plug, interchange with other plug or replace to localize malfunction.
|-
|
|2. Run compression check.
|-
|
|3. Inspect cylinders to determine whether coolant and engine oil are entering.
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|
|Rough idle
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}

MSS60 Error: 2B3C, P0308 - Revision history

Rcollins at 21:14, 3 February 2015

Rcollins: Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2B3C - P0308 |- |'''Fault text''' |Misfire with cutoff, cyl. 8 |- |'''Fault description''' |Cylinder 8 Misfire..."