View source for MSS60 Error: 2B15, P0638, P1636, P2100

__FORCETOC__


==== '''2B15 - P1636''' ====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B15 - P1636
|-
|'''Fault text'''
|Throttle-valve actuator, governor monitoring, bank 1
|-
|'''Fault description'''
|Throttle Valve Circuit (Bank 1)
|-
|'''Condition for fault identification'''
|Test condition: Actuator shifts to Failsafe mode
|-
|
|Terminal condition: TERM87
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory, conduct EDR electronic throttle valve control system test,
|-
|
|2. Check plug and wiring harness at throttle valve sensor DKG1 and electronic throttle valve control EDR1,
|-
|
|3. Replace DKG1 or EDR for Bank 1
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


==== '''2B15 - P2100''' ====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B15 - P2100
|-
|'''Fault text'''
|Throttle-valve actuator, governor monitoring, bank 1
|-
|'''Fault description'''
|Throttle Actuator 'A' Control Motor Circuit/Open
|-
|'''Condition for fault identification'''
|Test condition: Actuator shifts to Failsafe mode
|-
|
|Terminal condition: TERM87
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory, conduct EDR electronic throttle valve control system test,
|-
|
|2. Check plug and wiring harness at throttle valve sensor DKG1 and electronic throttle valve control EDR1,
|-
|
|3. Replace DKG1 or EDR for Bank 1
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


==== '''2B15 - P0638''' ====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B15 - P0638
|-
|'''Fault text'''
|Throttle-valve actuator, governor monitoring, bank 1
|-
|'''Fault description'''
|Throttle Actuator Control Range/Performance (Bank 1)
|-
|'''Condition for fault identification'''
|Test condition: Actuator reports system error
|-
|
|Terminal condition: TERM87
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory, conduct EDR electronic throttle valve control system test,
|-
|
|2. Check plug and wiring harness at throttle valve sensor DKG1 and electronic throttle valve control EDR1,
|-
|
|3. Replace DKG1 or EDR for Bank 1
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


==== '''2B15 - P0638''' ====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B15 - P0638
|-
|'''Fault text'''
|Throttle-valve actuator, governor monitoring, bank 1
|-
|'''Fault description'''
|Throttle Actuator Control Range/Performance (Bank 1)
|-
|'''Condition for fault identification'''
|Test condition: Actuator reports regulator error
|-
|
|Terminal condition: TERM87
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory, carry out EDR electronic throttle valve control system test,
|-
|
|2. Check plug and wiring harness to throttle valve sensor DKG1 and EDR1,
|-
|
|3. Replace DKG1 or EDR Bank 1,
|-
|
|4. With UMWB engine protection check throttle valve assembly for stiction
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}