View source for MSS60 Error: 272D, P0056, P0057, P0058

__FORCETOC__

====272D - P0056====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|272D - P0056
|-
|'''Fault text'''
|Oxygen sensor, output-stage diagnosis, heater behind cat., bank 2
|-
|'''Fault description'''
|HO2S Heater Control Circuit (Bank 2 Sensor 2)
|-
|'''Condition for fault identification'''
|Test condition: Driver info includes OPENLOAD
|-
|.
|Terminal condition: none
|-
|.
|Voltage condition: none
|-
|'''Condition for fault memory entry'''
|100 ms
|-
|'''Action in service'''
|1. Check plug and wiring harness on post-cat sensor LSNK B2,
|-
|.
|2. If OK replace sensor
|-
|'''Fault effect and breakdown warning'''
|MIL on after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL
|-
|'''Service instruction'''
|none
|}


====272D - P0057====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|272D - P0057
|-
|'''Fault text'''
|Oxygen sensor, output-stage diagnosis, heater behind cat., bank 2
|-
|'''Fault description'''
|HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
|-
|'''Condition for fault identification'''
|Test condition: Driver info includes short circuit to ground
|-
|
|Terminal condition: none
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|100 ms
|-
|'''Action in service'''
|1. Check plug and wiring harness on post-cat sensor LSNK B2,
|-
|
|2. If OK replace sensor
|-
|'''Fault effect and breakdown warning'''
|MIL on after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL
|-
|'''Service instruction'''
|None
|}


====272D - P0058====
{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|272D - P0058
|-
|'''Fault text'''
|Oxygen sensor, output-stage diagnosis, heater behind cat., bank 2
|-
|'''Fault description'''
|HO2S Heater Control Circuit High (Bank 2 Sensor 2)
|-
|'''Condition for fault identification'''
|Test condition: Driver info includes short circuit to battery voltage
|-
|
|Terminal condition: none
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|100 ms
|-
|'''Action in service'''
|1. Check plug and wiring harness on post-cat sensor LSNK B2,
|-
|
|2. If OK replace sensor
|-
|'''Fault effect and breakdown warning'''
|MIL on after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL
|-
|'''Service instruction'''
|None
|}